- Interesting facts about training evaluation
- Quick guide for training evaluation
- Change history
- How-To – Configure Training Evaluation
- How-To – Evaluating Training Sessions
This document, ” HowTo: QMAppSolutions Training Evaluation,” applies to version 1.18.0.0 of QMApp and version 1.11.0.0 of QMApp Solutions.
This document describes the configuration and use of the QM extension “Training Evaluation.”
It explains how to set up a training configuration, how to correctly link the QMApp Questionnaires and QMApp Solutions training evaluation application parts, how to create evaluations and how to plan training courses.
The document does not go into how to manage users or create questionnaires and question categories.
This document guides you step by step through the creation and use of a training evaluation.
Interesting facts about training evaluation #
Training evaluation is an extension of QMApp Solutions and makes it easier for you to organize your training courses or instructions. You receive an overview of your training courses, attendance confirmations and results of knowledge checks.
Quick guide for training evaluation #
The quick guide to training evaluation provides an overview of the steps required to create a training evaluation.
The list of steps are:
- QMApp Log in
- Create and release questionnaire
- Create users and grant them rights for questionnaires (questionnaire, protocol, user)
- Create a protocol that is used as a template
- QMApp Solutions Log in
- Create training evaluation configuration
- Create or import participants
- Evaluate training
- Optional – Automatic Validation
- QMApp Solutions, copy ‘Alias’ configuration
- Insert QMApp Post Action URL of the ‘Alias’ configuration for questionnaires
- Have training participants fill out the questionnaire
Change history #
Version 1.18.0.0 #
No separate continuous text available in the source document.
How-To – Configure Training Evaluation #
How-To – Configure Training Evaluation
Log in #
Log in with account #
Log in with your account on the homepage https://portal.qmapp.eu/de/Default/Login.
Image placeholder: Figure 1: Login page
You can log in with your account or a user with the appropriate authorization (create and edit questionnaire).
Create and release questionnaire #
Create a questionnaire to be used for the training.
The questionnaire must contain the mandatory questions first name, surname and one for the email address. The questions are selected later in the configuration and are used for the logical connection of protocols with the training evaluation and its participants!
Note:
If you also want to do a knowledge check, you can also include knowledge questions in the questionnaire. Avoid free text questions for knowledge checks. Typos can lead to incorrect answers when filling in the questionnaire!
Create users and assign rights #
A user must be entered in the configuration of the training evaluation (QMApp Solutions) for automatic validation.
To do this, select an existing user or create a new user in the QM app.
Image placeholder: Figure 2: Manage users
As the questionnaire, the logs and the questions are required for validation, this user must have the following rights:
- View protocols
“View: Completed question from questions shared with this user”
or
“View: All completed questionnaires”
- View questionnaire
“View: View: Questionnaires released for this user”
or
“View: Questionnaires”
- View question
“View: View: Questions from questionnaires shared with this user”
or
“View: Questions”
Image placeholder: Figure 3: Overview of employees
ATTENTION:
If you later change the user’s password, the new password must also be changed in the configurations of the training evaluations. Otherwise the automatic validation will no longer work.
Create protocol for validation #
Log in to https://portal.qmapp.eu with the user or open the app on the mobile device. The questionnaire that is to be used for the training evaluation must be released for this user.
Fill out the questionnaire correctly. The report will be used as a template to validate the training evaluation as “correct.” Therefore, please make sure that the questions are answered correctly.
Tip:
When creating the questionnaire, use the question types Dropdown, Yes/No, Yes/No/A.A., Numbers or Multiple choice for the knowledge checks.
There may be spelling differences in free text questions. Deviating spellings will be considered incorrect.
Register QMApp Solutions #
Log in to https://solutions.qmapp.eu with your account or a user with sufficient access rights.
Manage participants #
This step is optional and is required if you want to plan training courses and want an overview of your employees and their training courses. The planned training evaluation enables the trainer to evaluate participation in the training or to carry out a knowledge check. It is also possible to validate participants’ results.
To plan or better evaluate employee training, create a data record for each of your employees. This can be done manually or via Csv import.
Open the configuration of the training evaluation. On the training overview page, you will find the button . You will be redirected to the Employee list view.
Image placeholder: Figure 4: Overview of employees
In this view, you can use “New…” to create new employees, import multiple employees via a CSV file, edit employees, and delete users
Note:
- The employees created here are available for ALL configurations of your training evaluation!
- The employee’s e-mail address is used for referencing (training evaluation and protocols) and validation. Each email address can only be used once!
Create employee #
You can use the “New…” button to create new employees.
Image placeholder: Figure 5: Overview of employees
Import employee list #
Using the “Import CSV” button, you can import multiple employees into the system at once or update existing employee data.
Image placeholder: Figure 6: Overview of employees
The structure of the CSV file must be as follows:
Email address
First name
Surname
Department
active/inactive
- Email address: is the employee’s unique email address. It is used for identification.
- First name: First name of the participant
- Last name: Last name of the participant.
- Department: Department or role to which the employee belongs. It is used for grouping and easier creation of the training evaluation configuration.
- Active/Inactive: Active users receive training information and status updates and are automatically prompted to complete outstanding training courses in the case of periodic training. If the column is left blank, the users are automatically imported as active. Valid values are “active” and “inactive”
After importing, you will receive a message about the success of the import, which users were newly created, overwritten or not changed. If an error occurs during the import, this will also be displayed.
Image placeholder: Figure 7: Successful import of employees
Switch employees inactive and active #
Inactive employees do not receive automated requests for training evaluations.
However, inactive employees are still displayed in the training evaluation unless you remove them from the configuration. This means that you can still evaluate and document training courses for employees who have left the company and print out certificates of attendance.
Image placeholder: Figure 8: Activating and deactivating employees
Employees can also be made inactive and active with the help of the import via Csv file.
See 2.6.2 Import employee list
Note:
Inactive employees do not receive an automatic request for training courses to be carried out!
Delete employees #
You can delete employees individually or several employees at once.
Open the employee view. You will see the list of all employees, with a checkbox at the top and the last column with the action buttons.
Figure 9: Delete Employee – Overview of All Employees.
Delete individually: Click the red “X” at the end of each employee’s name. Confirm the deletion.
Bulk Deletion: Select the employees you want to delete. Click the red “X” in the lower-left corner of the employee list to delete all selected employees.
Create configuration #
Log in to QMApp Solutions using the account or a user with sufficient permissions. See “Manage QMApp Solutions Access Rights” to grant employees access to the QMApp Solutions modules.
Open the “Configurations” list in the Training Evaluation module by clicking the button on the Training Evaluation card. You can find the card on the overview page.
Create a new configuration by clicking the “New” button, or edit an existing configuration. To do so, use the button in the corresponding row of the configuration.
Basic settings #
Open the desired configuration or create a new one.
Select the alias. It is unique throughout the system. If you use automatic validation, the alias is also part of the URL that you must enter as a post action of the questionnaire. For more information, see section 2.8 Setting up automatic validation and the settings you need to make:
“Alias”: Name of the validation training session and name in the dropdown menu during evaluation
“Questionnaire”: Select the questionnaire that participants must complete to receive a training certificate or to take the knowledge assessment.
“Minimum required points”: Required for validation or a knowledge test.
Completed on: Select the day on which you correctly completed the questionnaire (see:2.4 Create protocol for validation)
Template: If you have correctly selected the completed on date, the protocols of the questionnaire are displayed here. Select your completed protocol. Each training course requires a selected protocol as a template!
Figure 10: New configuration for training evaluation
Basic participant settings #
Open the desired configuration or create a new one. Go to the “Participants” tab.
Assign the questions from the questionnaire here.
First name of participant: Select the appropriate question from the questionnaire.
Last name of participant:Select the appropriate question from the questionnaire.
Use the “Send Automatic Email” button to ensure that the participant receives an email after completing the questionnaire.
Participant Email: Select the appropriate question from the questionnaire.
Please also note that the settings in section 2.8 Setting up automatic validation must be made correctly for automatic sending to work properly.
Figure 11: Participants
Basic settings Trainer #
Open the desired configuration or create a new one. Go to the “Trainer” tab.
Enter the trainer’s name in the “Trainer Name” field. The name will appear later in the report, and you can filter by trainer to view all of that trainer’s training sessions.
By selecting the “Send automatic email” checkbox, you can ensure that the trainer receives a notification every time a questionnaire is completed.
Please also note that the settings in section 2.8 Setting up automatic validation must be made correctly for automatic sending to work properly.
In the “Trainer Email” field, enter the trainer’s email address to which the results of the automated validation will be sent later.
The “Trainer Username” field specifies the user configured in Section 2.3, “Create User and Assign Permissions,” along with the corresponding password. These login credentials are stored in encrypted form and are used during automatic validation for identification purposes so that all logs can be retrieved.
Note:
If you change the password of this user in https://portal.qmapp.eu, you must also change it here so that the automated validation can be carried out.
Figure 12: Attitudes towards the trainer
Validation #
The training evaluation can also be used to check the knowledge of the training participants.
Add knowledge questions to the questionnaire you are using for the training (see 2.2 Creating and sharing questionnaires) and fill in a protocol with the correct answers.
Open the desired configuration or create a new one. Go to the “Template” tab.
Figure 13: Participants
Use the “Completed on” and “Template” options to select the correctly completed questionnaire. The log will load. There is a checkbox at the beginning of each question. If you check this box, the question will be included in the validation process. When a participant completes the questionnaire, the answers from the newly completed log will be compared with the answers from the questionnaire configured here.
The “Minimum Required Points” field specifies how many of the “knowledge questions” must be answered correctly for the exam to be considered passed.
Note:
Questions of the multiple choice type are only scored as incorrect once, even if several incorrect answers were selected. Multiple selection is only correct if exactly the answers were selected or not selected as in the template
Assign employees #
The training evaluation also enables the planning of training courses and a related overview of all training participants.
You can assign employees in the configuration. Open the configuration, select the “Planning” tab, and scroll down to the “Employee Management” section.
Figure 14: Allowing employees to participate in training
The right-hand column displays all employees who have been created or imported in Employee Management. Only employees with the status “active” are displayed in the employee list.
Use the “+” button to add individual employees to the “Assigned Employees” list.
Figure 15: Allowing employees to participate in the training
To simplify the setup process, you can also add all employees from an entire department at once. To do this, filter by department and click the “+” button next to the “Filter by Department” field. See Figure 15: Enrolling Employees in Training
Note:
In order for the system to correctly assign the protocol and employee, the Email question in the Participants folder must be assigned correctly. For more information, see section 2.7.2 Participant basic settings.
Setting the email notification #
Figure 16: Email content and settings
Emails can be sent to participants or trainers via the evaluation or via automatic validation. For automatic sending, please refer to section 2.8 Setting up automatic validation. This section explains which content and attachments you can select for email notifications.
Certificate type:
- Participated: A confirmation of attendance is created with the text “Attended” in the PDF document. Use this to send confirmations of attendance for training courses.
- Passed: Depending on the validation, a pdf with the text – “Passed” or “Failed” is generated.
- Passed and evaluated: Depending on the validation, a pdf with the text – “Passed” or “Failed” and the number of correctly completed questions, is generated.
Send certificate:
- Do not send: The certificate is not attached to the email and is not sent automatically.
- Only passed: Is only attached to the mail if the knowledge check was completed positively
- always send: The certificate is always sent.
Figure 17: Allowing employees to participate in the training
Send validation protocol: if this setting is activated, the validated protocol is also sent with the email. The validation log shows correct and incorrect questions / answers that were compared for the validation!
Company: Company for which the training was carried out. The text entered here is displayed in the certificate pdf.
Training name: Name of the training course that was held. The text entered here is displayed in the certificate pdf.
Training name: Contents of the training. The text entered here is displayed in the certificate pdf.
Setting the email subject and text #
The text of the emails sent to the participants can be freely selected depending on the status of the participant.
Open the Training Evaluation Configuration and go to the “Email” tab.
You will find fields for text and subjects for the variants
Email template for failed training courses: Text and subject if the performance review was completed with insufficient points.
Email template for passed training courses: Text and subject for passed exam
Email template Request for training: will be sent if no protocol with the email could be found for the participant.
Set up automatic validation #
The training evaluation can be used for the automatic sending of training confirmations and knowledge checks. When the training evaluation questionnaire is completed, the participant and trainer receive an email.
QMApp Solutions – Training and Configuration #
QMApp Solutions – Training and Configuration
Open the desired configuration. Under “Participants,” “Send automatic email” must be enabled.
Save the configuration. In the “Training Reports” view, you will see a list of training reports. In the “Link” column, you’ll find the link that must be clicked to trigger the validation. Copy the link and enter it in the questionnaire’s post-action URL (see 2.8.2 QMApp – Entering the Post-Action URL)
QMApp – Enter Post-Action URL #
QMApp – Enter Post-Action URL
Go to https://portal.qmapp.eu, log in, and edit the questionnaire you created for the training session. In the “Edit Questionnaire” view, open the “Settings” tab and enter the link from the training configuration under “Post-Action URL.” You can find the link in QMApp Solutions (see 2.8.2 QMApp – Enter Post-Action URL) for more information about the link.
Plan training courses #
Training courses can also be planned and automated reminders can be sent to participants.
Set up the configuration as described in Section 2, “How To – Configure Training Evaluation.” Also make sure that employees are imported correctly and assigned to the training (see “Assign Employees”).
Open the configuration you want to schedule and go to the “Scheduling” tab.
- Start: Start of the training
- End: End of the training
Remind Days: Days before the end of the training period on which employees should be automatically informed by e-mail.
Times: choose the frequency of the training, in the period indicated above
Note:
The reminder is calculated based on the date in the “Start” field and ends before the end date. The text and subject line of the email are entered in the “Email” tab.
Chart 18: Planned training (monthly from 1.1.2025 to 31.12.2027 and reminder)
Deleting configurations #
Open the “Configurations” list in the Training Evaluation module by clicking the button on the Training Evaluation card. You can find the card on the overview page.
In this list, you’ll find all the configurations for your training evaluations. Click the red “x” to delete the configuration.
Note:
Keep the configurations in order to be able to document the history of your training courses in the future. You can find out more about evaluations of your training courses in chapter 3.1 Display training evaluation.
How-To – Evaluating Training Sessions #
How-To – Evaluating Training Sessions
Show training evaluation #
Completed questionnaires #
Select this view if you have created a training evaluation without employees.
Log in to QMApp Solutions with the account or a user with sufficient authorizations.
Open the “Training Evaluation Overview” view by clicking the “Training Evaluation” icon in the overview.
In the filter, select the view type “Completed questionnaires.”
Depending on the remaining filters, the list now shows all the questionnaire logs that were used in the configured training evaluations.
This view is used if not all participants are registered in the company before the training or if they are only temporarily available.
The protocols are validated and color-coded according to their status, passed or failed. Failed protocols are shown in red, protocols with a sufficient number of points are shown in green. See 2.7.4 Validation for information on how to activate and configure validation in a configuration.
Figure 19: Validation of all completed questionnaires
Planning overview #
Select this view if you have created a training evaluation for employees and email addresses.
Log in to QMApp Solutions with the account or a user with sufficient authorizations.
Open the “Training Evaluation Overview” view by clicking the “Training Evaluation” icon in the overview.
In the filter, select the “Planning Overview” view type.
The training courses for all employees are now displayed in the list. One line per employee and per training course to which the employee has been assigned.
The employees’ protocols are validated and color-coded according to their status, passed or failed. Failed protocols are shown in red, protocols with a sufficient number of points are shown in green. If an employee has not completed the questionnaire in the period specified in the filter, it is displayed in white.
See 2.7.4 Validation for information on how to activate and configure validation in a configuration.
Figure 20: Planning overview
Viewing validated protocols #
In addition to automatic sending, you can also send the results and training confirmations to participants retrospectively.
Log in to QMApp with the account or a user with the corresponding rights.
Open the “Training Evaluation Overview” screen. Filter the list as needed.
In each line of the list you will find buttons for View, PDF protocol, Confirm.
View: View the protocol and validation in the browser.
- PDF protocol: Download the PDF with the validation and the completed protocol
- Confirmation: Download the training confirmation in pdf format
Note:
In the “Planning Overview” view, there is no log and no training confirmation for participants who did not complete the questionnaire during the filtered time period (white/gray rows).
Sending results #
In addition to automatic sending, you can also send the results and training confirmations to participants retrospectively.
Log in to the QM app with the account or a user with the corresponding rights.
Open the “Training Evaluation Overview” screen. Filter the list as needed.
In each line of the list there is an icon for Email. When you send the email, the text is sent as entered in the training configuration settings. A distinction is made between passed, failed and reminder.
Note:
You can also send several emails at once. Select the box in the desired lines and click on the mail symbol below the list!
Attention: Emails are only sent to selected and currently visible entries in the list.
Sending reminders #
Reminders can also be sent out manually.
Log in to the QM app with the account or a user with the corresponding rights.
Open the “Training Evaluation Overview” screen. Filter the list as needed.
In the filter, select “Planning Overview” under View Type, search for the user you want to send the reminder to, and click the Email icon.
Automated sending of results and reminders #
It is possible to send the training status to participants automatically. See chapter 2.9 Planning training courses to find out how you can configure a training course so that QMApp Solutions can send reminder emails to participants.